Yang Sun App Studio
Back to Blog
2026-11-148 min readUtility

How to Calculate Board Feet, and What 4/4 Thickness Means

How to Calculate Board Feet, and What 4/4 Thickness Means

Author: SunClaw Team · Updated: 2026-11-14

Quick answer

A board foot is a volume, not a length. One board foot is a piece 1 inch thick, 12 inches wide, and 12 inches long: 144 cubic inches, about 0.00236 cubic meters.

Hardwood sold by the board foot uses either of these equivalent formulas:

  • Thickness (inches) × width (inches) × length (feet) ÷ 12
  • Every dimension in inches: thickness × width × length ÷ 144

The worked example in the app: 5 boards, 8/4 (2 inches) thick, 6 inches wide, 8 feet long. One board is 2 × 6 × 8 ÷ 12 = 8 board feet. Five boards are 40 board feet. At $9.50 per board foot, the stock is 40 × 9.50 = $380, before saw kerf and defects.

What 4/4, 5/4, and 8/4 mean

These are rough hardwood thicknesses in quarter-inches.

MarkThickness
4/41 inch
5/41.25 inches
8/42 inches

A 4/4 on a quote is not 4 inches. Multiply by 4 and the board footage is four times too high.

Nominal size or actual size

Dimensional lumber such as a 2×4 or 2×6 is priced on the nominal size. A 2×4 measures about 1.5 by 3.5 inches after surfacing, and you still enter 2 and 4. For hardwood boards, enter the thickness, width, and length you are buying. Do not mix a surfaced size and a rough size on the same line.

How much extra to buy

Net footage is short once you saw, skip defects, and plane. The guide in the app says to add 15 to 20 percent. A cut list defaults to 15 percent waste, and that allowance moves in steps of 5 from 0 to 60 percent. Board feet with waste equal net board feet × (1 + waste percent ÷ 100).

The percentage is an allowance, not a measurement. Knots and sapwood on a particular board are not in the list. Look at the board.

Do not use this for plywood sheets

A 4×8 plywood sheet is sold by the sheet, not by the board foot. The formula above does not answer how many sheets a parts list needs. That count is a different job: how many 4×8 sheets.

A log does not use the board formula either. Log scale uses the small-end diameter inside the bark and the length. Doyle, Scribner, and International 1/4 inch do not agree. Ask which rule the buyer uses. The calculator, history, one cut list, and the Doyle rule stay free. The cut optimizer, unlimited cut lists, Scribner and International, inventory, and a species price book are a one-time unlock.

The app is Board Foot Calculator.

FAQ

Q: What is the board foot formula? A: With thickness, width, and length all in inches, multiply them and divide by 144. With length in feet, use thickness (inches) × width (inches) × length (feet) ÷ 12. The two formulas match.

Q: Does 4/4 mean 4 inches? A: No. 4/4 is 1 inch and 8/4 is 2 inches. The number counts quarter-inches.

Q: Should a 2×4 be entered as 1.5 by 3.5? A: No, when the yard prices it on the nominal size. Enter 2 and 4. Do not put the surfaced size on a line that is priced nominally.

Q: How much extra stock should I buy? A: The in-app guide says 15 to 20 percent for defects, saw kerf, and planing. A cut list defaults to 15 percent.

Q: Are plywood sheets measured in board feet? A: No. Plywood is counted in sheets. Board feet are for hardwood sold by volume. Use a cut-list article for sheet count, and ask whether a log is scaled with Doyle, Scribner, or International.

About the app

ItemDetail
AppBoard Foot Calculator
FreeCalculator, history, one cut list, Doyle log rule
One-time unlockCut optimizer, unlimited lists, quick tally, PDF and CSV, Scribner and International, inventory, species price book
#board foot#4/4 lumber#woodworking#waste allowance#Board Foot Calculator